New version modbo4.0 PS2 mod-chip Matrix infinity 1.99

modbo 4.0，工作穩定可靠，繼之前modbo 3.0的火爆銷售，升級版4.0強勢登場！固件由Infinity1.54升級成為Infinity1.91，支援3個記憶卡引導程式，可以從記憶卡引導3個BOOT檔： R1 : "mc0:BOOT/BOOT.ELF" R2 : "mc0:BOOT/BOOT2.ELF" L2 : "mc0:BOOT/BOOT3.ELF" 支援VGA（可以從顯示器以逐行掃描的方式顯示圖像） 此IC開機有MATRIX的LOGO，配帶7W機型的小防燒，適合V4至V16主板的機型，可以免光碟引導記憶卡裏或者HD裏的ELF檔。厚機的玩家利用這個原理，將hdl的ELF檔放入記憶卡或HD中，就可以免光碟直接進入hdl玩遊戲，價錢也非常廉價。 免光碟機用記憶卡啟動方法： 1，在記憶卡中，新建文件夾，文件夾名“BOOT”，注意大寫 2，把hdl或launchelf等的elf，改名為“BOOT.ELF”放在裏面 3，按住手柄的R1鍵開機，順利進入 免光碟機用硬碟啟動方法： 用launchelf在硬碟的_boot分區裝入：“boot.elf”（注意小寫，與記憶卡的大寫剛好相反）,找不到相關軟體的可以向店主索取 另一種免光碟機用硬碟啟動方法（U盤運行Dev2install）： 1、從官方網站http://www.infinitymod.com/matri ... /Dev2Installv11.zip下載軟體，解壓後得到以下檔： DUMMY.BIN DUMMY2.BIN SYSTEM.CNF DEV2I.ELF 2、把DEV2I.ELF和其他您想在硬碟引導的ELF檔（這個檔必需命名為BOOT.ELF，一定要大寫）放在U盤根目錄，記得這兩個檔都放在根目錄。 3、把U盤插在PS2上。 4、PS2再運行LaunchELF裏面的FILEBROWSER，流覽到U盤根目錄，運行DEV2I.ELF，按照提示安裝BOOT.ELF，然後PS2自動關機。 5、再開機，按L1便可直接引導硬碟裏的ELF。 6、或者在開機之前按△＋○進入IC設置功能表，將BOOT MODE設置成DEV2後完全可以不按L1直接引導硬碟裏的ELF。 終極硬碟啟動方法（運行Dev2install.ISO） 把自製的ISO灌入PS2硬碟（就像平時灌遊戲一樣），再運行hdl，按下PLAY就可以直接運行dev2install了，然後按提示按X安裝ELF到硬碟，PS2關機，完成！ 改機圖紙：http://www.modbo.com/modbo4/install.htm 官方網站：http://www.modbo.com modboV4.0功能說明：支援二次讀盤，有完整PS2 LOGO，七星畫面支援色差輸出，自動識別DVD和PS1遊戲，完美支持D9和DVD-R+R，可以免光碟引導記憶卡或者硬碟裏的ELF檔，開機前按△＋○進入IC設置選單。 modbo 3.0 for V1

modbo 3.0 for V2

modbo 3.0 for V3

modbo 3.0 for V4

modbo 3.0 for V05 V06

Japan、Taiwan

Pal

USA

modbo 3.0 for V07 V08

Japan、Taiwan

Pal

USA

modbo 3.0 for V09

Japan、Taiwan

Pal

USA

modbo 3.0 for v10

Japan、Taiwan

Pal

USA

modbo 3.0 for v12

Japan、Taiwan

Pal

USA

-----------------------------------华丽的分割线---------------------------------


Playstation2 Identification




(V1-V13)


How do I know which Playstation2 model# I have?



On the back side of your Playstation2 you find a number beginning with "SCPH-", the following number is the model number!






V14




SCPH-75001 (for North America)
The mainboard is a bit different from last SCPH-70011/70012/70001 versions.
Mainboard: GH-037-01




SCPH-75004 (for Europe)






V13




SCPH-70001 (for North America)
The Warranty Sticker location has moved from the back and is now located directly over one of the (6) screws on the v13 underside.
Another major change includes the removal of the Phone Line from the back of the v13 console, however, the Network Line is still present.
There is also a small layout change around the Motor Driver IC of the PSTwo mainboard (now GH-032-XX).
SCPH-70004 (for Europe) 
Mainboard is GH-032-13 





v12




The new mini PS TWO SCPH-7000x
SCPH-70012 CB (for United States)
SCPH-70011 CB (for North America)
SCPH-70002 CB (for Oceania)
SCPH-70003 CB (for UK)
SCPH-70004 CB (for Europe)
SCPH-70000 CB (for Japan)





V11




Only released in Europe.
The model # is SCPH-50004 with a GH-027 or GH-029 board.
Same board as v10 but console comes with a new laser unit.






v10




If have a USA/CANADA SCPH-50001 AND if you can find DATE CODE 3D as shown below, you have a v10 PS2 main board (GH-026 board).
SCPH 50001 / 50010 Date Code 3D is a v10. 



Update:
SCPH-50001 date code 4C is also a v10




If have a PAL (EUROPE/AUSTRALIA) SCPH-50002/3/4 AND if you can find "a" as shown below, you have a v10 PS2 main board (GH-026 board).



You can also check if your PS2 is a v9 or a v10 version start up your PS2 with no game in it, press triangle and check DVD driver version.
DVD VER 
3.00 = v9

DVD VER 
3.02 = v10




v9




If your model # is SCPH-50000, 50001, 50010, 50002, 50003 or 50004 you have a v9 PS2 main board (GH-023 board).
SCPH 50001 / 50010 date code 3a-3b-3c is a v9.
SCPH-55006/55007 GT ( white console ) is also a v9.




V8




Only released in the japanese market. The model # can be SCPH-39000 or SCPH-39006 (GH-022 BIOS 090).





V7





If your model# is SCPH-39000, 39001, 39002, 39003, 39004 or 37000 you have a V7 PS2 main board. 





V5/V6





Please check below if you have a V5/V6 PS2 main board.





The model numbers can be SCPH-30000R, SCPH-30001 R, SCPH-30002 R, SCPH-30003 R, SCPH-30004 R, SCPH-30006 R
But also some SCPH-30000, SCPH-30001, SCPH-30002, SCPH-30003 and SCPH-30004 PS2 have a V5/V6 main board.
The model shown below is used for reference only.












Make sure to double check that the screw shown below is actually in your system.
Simply take out the expansion slot cover,turn round your PS2 and check to see if the screw shown below is in your console, if it is, you have a V5/V6 console.




If you dont have the screw in the expansion slot you have an older V1-V4 PS2 board or a V7 board.








V4






Please check below if you have a V4 PS2 main board.





The model # can be SCPH-30000, SCPH-30001, 35001, SCPH-30002, 35002, SCPH-30003, 35003, SCPH-30004, 35004




If the marked screw doesn't show up in the expansion bay of your PS2 then please take a look on the bottom of the PS2 case. If there is an electrical hazard warning on the bottom of the case then it is a V4.





V1/V2/V3





Please check below if you have a V1/V2/V3 PS2 main board.




Turn the playstation upside-down and check how many screws there are.
The screws are covered by black plastic or rubber hole covers.
You can easily remove the screw covers by prying them off with a small flat head precision screwdriver.





If you have 10 bottom screws you have a V1, V2 or V3 PS2 model.
Version 4, 5/6 and 7 consoles can be differentiated from previous versions as they only have 8 screw covers on the underside of the console.




Console Versions 1 to 3


Console Version 4, 5/6, 7